|
|
T3-SC Consoles
|
|
|
MCC-6
The Master Control Console Type
6 (MCC-6) is a desktop unit designed as a traditional telephone style
control console. The MCC-6 incorporates a telephone handset, microphone,
speaker, backlit LCD display and keypad controls. The Console allows the
operator to establish two-way communications between Intercom Stations and
the Console.
The Console can answer incoming calls, place
calls on hold, forward calls to another Console, and provide voice paging to
Intercom Stations on a zone, all-call or emergency all-call basis. The
Console’s large 4x20 character LCD backlit display provides menu-assisted
prompting, visual indication of incoming calls, priority levels, paging zone
selection, room selection and many other features.
|
|
|
MCC-6T
The Master Control Console Type 6 Telephone (MCC-6T) not only functions
as a standard MCC-6 Intercom Console, but connects to a facility’s phone
system to allow for telephone functionality. A single device, therefore,
permits both intercom functioning and phone functioning (both placing and
receiving calls). When receiving calls, Caller ID information is displayed
on the Console screen.
The MCC-6T, aside from connecting to the T3
System, also connects to the phone system in the same manner as other single
line telephones (single pair RJ-11, no T3-KRA required). When the MCC-6T is
communicating via the phone system, it does not use intercom system
resources, and therefore does not block other consoles from the using the
intercom system. (Restrictions may be applied at the PBX/KSU for outgoing
calls or long distance if desired.) This makes the MCC-6T an ideal
alternative to a separate Master to Master Communications System.
|
|
MCC-VC
The T3 Virtual Master Control
Console (MCC-VC) includes the audio and control circuitry required to
conduct two-way communications from a custom-designed Console Panel. The MCC-VC
provides termination facilities for the connection of the external
components required to create a functional Console. External components are
incorporated into the custom-designed Console Panel and include a
microphone, speaker, volume control for listen audio, volume control for
tone audio, audio control switches (PTT and Cancel), associated 5V lamps for
the audio control switches, and a handset and cradle assembly. In addition,
the MCC-VC provides inputs for two user-defined switches. The loudspeaker
and tone volume is capable of having its volume digitally adjusted with two
push-button switches (increase and decrease).
|
|
|
MCC-PL
The T3 Panel Master Control
Console (MCC-PL) provides the means to conduct communications via a standard
19" rack-mount panel. The MCC-PL is a pre-fabricated rack-mount panel
that incorporates an MCC-VC board. The panel includes a loudspeaker for
intercom listening, two pushbutton switches to digitally adjust the listen
volume of the loudspeaker, a PUSH-TO-TALK momentary switch for talk/listen
communication, a CANCEL momentary switch to cancel calls, and a
panel-mounted microphone (also available as gooseneck) for intercom talk and
paging. Lamp driver circuitry illuminates the PTT and Cancel
buttons during operation. In addition, the MCC-PL provides inputs for two
user-defined switches, and includes provisions for a panel-mounted handset
and cradle assembly.
|
 |
|
MCC-SP-C
The Master Control Console
Selector Panel (MCC-SP-C) provides the means to control communications of up
to 25 Intercom Stations via a standard 19" rack-mount panel. The MCC-SP-C
incorporates 25 LEDs for a visual status of each Intercom Station, and 25
Push-Button Switches for controlling intercom functions with each Station. A
Shift button allows for an alternative function for each 25 Push-Button
Switch. An additional three Push-Button Switches are custom-programmable for
the end-user’s preference (e.g., all-call page).
|
|
|
|
|
|
